Singxer F-1 XMOS USB digital interface board,XU208 chip,High end U8 upgraded version

SKU: F-1
Diggs(52)
Views(29.65K)
MID-YEAR DEAL US$158.39
Mid-Year Sales, Was Price: US$179.99
Ends in
378 day
In Stock - Shipping within 48 hours Worldwide Free Shipping
  • Using more advanced process technology
  • The first use of XMOS latest xCORE-200 series USB interface digital products
  • New generation XMOS chip,using more advanced process technology

* Required Fields

Details

 

Drivers: https://download.shenzhenaudio.com/Singxer/Singxer-USB-Audio-Class2-Driver.zip

 

Description:


F-1 digital interface,our team develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chips.F-1 use low jitter clock system digital interface. F-1 digital interface using standard USB2.0 input interface, while F-1 has many kinds of output interfaces, including coaxial RCA and I2S interfaces.

 

The new generation XOMS chip of XU208,using more advanced process technology,performance than the older U8 chip doubled, reaching 1000MIPS processing capabilities.


1.F-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip,using more advanced process technology, performance than the older U8 chip doubled,reaching 1000MIPS processing capabilities.


2.It is known that the core of the algorithm is heavy digital audio.Our team in the field of digital audio work for many years, at the same time get XMOS FAE support team, we conducted a number of technical improvements and optimization algorithms on the basis of the original firmware.

 

Specifications:

Each output interface supports sample rates:
PCM: 44.1KHz,48KHz,88.2KHz,96KHz,
176.4KHz, 192KHz,352.8KHz,384KHz
Wherein I2S out support full sample rate,S/PDIF supports up to 192KHz


DSD:
2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - native
Wherein I2S out support all DSD format,S/PDIF and AES/EBU support DSD64 DOP mode
Bits wide:
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

 

Screw position,I2S is compatible with Amanero board.
Use three crystal oscillators,they are all active crystal oscillators,and the audio crystal oscillators is CRYSTEK CCHD.

Each interface electrical standards:
1.USB input socket is a standard USB-B type female, USB power supply range 4.5V-5.1V ;
2.RCA connector outputs standard S/PDIF Electricity level is 550mV(standard connection load),the output impedance of 75 ohms.



Design details:

1. Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board with a 2-way independent LDO for power supply,part of the clock use ADI's ultra low noise LDO,in order to ensure the ultimate performance.

2. PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes,high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal with a special pocessing,the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.

 

System compatible:

1:Windows 7,Windows 8;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function

 

The instruction of I2S output signal scoket:

1.It is High dB mute(DSD ON is DSD data stream)
2.All dB is LVCMOS,Voltage is 3.3V.
3.VD3.3 is output supply,and output electric current 50mA
4.MCLK output 22.5792Mhz or 24.576Mhz clock
5.FS0,FS1,FS2 is sample dB,FS3 not.
6.LRCLK =DSDR,SDATA=DSDL,BCLK=DCLK

Customer Questions & Answers

Nick
Nick

hi, supports for windows XP and Which driver XP is suitable for XU208?

8/13/17 5:33 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Nick,f-1 doesn't support Windows XP.It can work with up win7.Thank you.

Was this question helpful to you?  Yes   No
SleCk
SleCk

Does new Window 10 version 1703 with native USB 2 driver support F1?    Which is better? Window or Yours ?    

9/18/17 7:00 PM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi,the lastest driver is 4.11.The factory don't know Window 10 version 1703.Thank you.

Was this question helpful to you?  Yes   No
Tubeman
Tubeman

where can i finde driver 4.11    i thout Singxer-USB-Audio-Class2-Driver_v3.34.0.exe vas the katest

9/19/17 1:06 PM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Tubeman,we had sent to your email.Please check.

Was this question helpful to you?  Yes   No
Tubeman
Tubeman

is there a new firmware also

9/21/17 3:27 PM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Tubeman,it has no new firmware.Thank you.

Was this question helpful to you?  Yes   No
Tubeman
Tubeman

what is the expected shipping time to sweden for F1 XMOS 208

10/11/17 4:11 PM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Tubeman,it will take 4-15 days.Thank you.

Was this question helpful to you?  Yes   No
Sebastian
Sebastian

Hello, I bought the Singxer F-1 XMOS but I have no sound when using on Macbook Pro with latest OS X Sierra 10.12.6.  All Led are working fine but no sound.    Any ideas?

10/12/17 6:04 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Sebastian,maybe your setting have some problem.F-1 must connect the dac.Thank you.

Was this question helpful to you?  Yes   No
thep
thep

Hi can you please send me the newest driver to use with window 10? i only have v3.34.0  thanks!

11/5/17 9:08 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Thep,  Please download from https://download.shenzhenaudio.com/Singxer/Singxer-USB-Class2-Driver_v4.11.0.NEW.rar

Was this question helpful to you?  Yes   No
tubeman
tubeman

and the new firmware 2.22

11/23/17 2:05 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi,Please let us kow more details.Thank you.

Was this question helpful to you?  Yes   No
Serhan

Hello,  Is it safe to install the newest driver "Singxer_USBAudio_v4.36.0_2017-11-14_DSD512.rar" for Singxer F-1?  Thank you

12/14/17 5:59 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Dear,f-1 can't use this driver.Thank you.

Was this question helpful to you?  Yes   No
Marcus
Marcus

does this work alright on windows 10?

1/27/18 7:22 PM Asked.
shenzhenaudio.com
shenzhenaudio.com

Dear,yes,it can work on windows 10.Thank you.

Was this question helpful to you?  Yes   No

Daily Deals