GUSTARD C16 10M Clock Audio Clock OCXO

SKU: GUSTARD C16
Diggs(0)
Views(565)
Price: US$659.00
In Stock - Shipping within 48 hours Worldwide Free Shipping

• The C16 is a 10MHz high performance low phase noise clock generator;

• The C16's built-in crystal oscillator is a new SC-cut OCXO that has been customized from the top manufacturers in the crystal industry to ensure stable quality.;

• A true low jitter design with low near-end phase noise.

Its measured performance is more than two orders of magnitude better than the traditional SPXO femtosecond crystal oscillator.;

• With six BNC interface outputs (3+3), it is divided into two output modes: direct output and isolated output.

• The output waveform of the C16 is three or six square wave outputs, which is better for back-end device compatibility than sine wave output.;

• During the development process, we optimized the subjective and objective audio performance of the C16 specifically for the Gustard U16 and future audio digital source devices.;

• The C16 is not the most extreme performance design without considering cost. Instead, it uses a cost-effective OCXO to achieve a good balance between performance and price. The C16 has better subjective and objective audio performance than the traditional SPXO femtosecond crystal oscillator, and the price is also relatively friendly.

* Required Fields

Details

Gustard C16 master clock generator technology features:

• The C16 is a 10MHz high performance low phase noise clock generator;

• The C16's built-in crystal oscillator is a new SC-cut OCXO that has been customized from the top manufacturers in the crystal industry to ensure stable quality.;

• A true low jitter design with low near-end phase noise.

Its measured performance is more than two orders of magnitude better than the traditional SPXO femtosecond crystal oscillator.;

• With six BNC interface outputs (3+3), it is divided into two output modes: direct output and isolated output.

• The output waveform of the C16 is three or six square wave outputs, which is better for back-end device compatibility than sine wave output.;

• During the development process, we optimized the subjective and objective audio performance of the C16 specifically for the Gustard U16 and future audio digital source devices.;

• The C16 is not the most extreme performance design without considering cost. Instead, it uses a cost-effective OCXO to achieve a good balance between performance and price. The C16 has better subjective and objective audio performance than the traditional SPXO femtosecond crystal oscillator, and the price is also relatively friendly.


Vivid and Gentle output modes (Vivid recommended)




 

Compact design, reasonable layout, neat workmanship, reliable materials.



Using a new SC-cut OCXO that has been customized from the top manufacturers in the crystal industry to ensure stable quality;


 

Digital shaping circuit, buffer and output stage.


 

 

Discrete linear power supply, low ripple, low temperature drift, fast response


 

Built-in audio dedicated toroidal transformer



Packaged with a clock signal cable


 

Parameter:

Output frequency: 10MHz
Frequency accuracy: <±300ppb
Frequency stability: <±50ppb
Output amplitude: ≥7dBm @ 50Rz
Output waveform: square wave
Output impedance: 50Ω
Near-end phase noise @1Hz(TYP): -100dBc
Short Stable (Allen Variance) (TYP): 2E-12


Other parameters:

• Output amplitude: 7dBm @50 Ohm
• AC power supply: AC 115V/230V 50/60Hz
• Machine power consumption: <15W
• Body size: width 220mm* height 50mm* depth 170mm (excluding protruding parts)
• Packing size: width 285mm* height 85mm* depth 270mm
• Weight: 2.5Kg (including packaging)

 

 

Steps:

1.The front panel's vivid and gentle buttons have the function of enabling or turning off the clock output of the same name on the rear panel.

 

2.Each time the power is turned on for the first fifteen minutes, the double LED flashes to indicate warm-up. At the same time, all clock output ports on the rear panel have no output.

 

3.After 15 minutes of power on, the dual LEDs are always on and all outputs are automatically turned on.

 

4. During the fifteen-minute warm-up period, you can ignore the warm-up to achieve direct output by pressing the vivid or gentle button on the front panel.



Customer Questions & Answers

Adrian
Adrian

Can this C 16 be used to clock 3 U16 together so they all share the same clock ?

9/2/19 1:00 AM Asked.
shenzhenaudio.com
shenzhenaudio.com

Hi Adrian , yes, it can. It can provide clocks to 6 U16 at the same time. Thank you!

Was this question helpful to you?  Yes   No
  1. 1