Singxer SU-1 USB digital interface with XMOS XU208 CPLD DSD512 DOP

Price: US$399.00
In Stock - Shipping within 48 hours Worldwide Free Shipping
  • Has many output interfaces.
  • Low jitter clock digital system interface.
  • High-performance,low noise.
  • fast response of the LDO as the main power source.

* Required Fields



The new Driver support DSD512 Download:


SU-1 digital interface of our team to develop a high-performance USB digital audio interface, using the XMOS latest xCORE-200 series chip. SU-1 is the independent development low jitter clock digital system interface(CRYSTEK CCHD-575/957 SERIES). SU-1 digital interface using standard USB2.0 input interface, while SU-1 has many output interfaces,including XLR Balanced Output AES,coaxial RCA and BNC,using HDMI socket output I2S port,WCLK clock output.

1.X-1 is the first use of XMOS latest xCORE-200 series USB interface digital products. New generation XMOS chip, using more advanced processing technology, performance is 2 times than the older U8 chip , reaching 1000MIPS processing capabilities.

2.It is known, the core of the algorithm is digital audio. Our team has been in digital audio field for many years, at the same time get XMOS FAE team support, we conducted a number of technical improvements and algorithms optimization on the basis of the original firmware.


Each output interface supports sampling rates:
44.1KHz, 48KHz, 88.2KHz, 96KHz,
176.4KHz, 192KHz, 352.8KHz, 384KHz
(I2S support all sampling rate,S/PDIF support upper to 192KHz

2.8 MHz (DSD64)-DoP, native
5.6 MHz (DSD128)-DoP, native
11.2 MHz (DSD256)-native
(I2S output support all DSD,S/PDIF,AES/EBU support DSD64 DOP mode)

Bits width:
the highest 32 bit over I2S output
The highest 24 bit over S/PDIF

Each interface electrical standards:
1.USB input socket is a standard USB-B type socket, USB power supply range 4.5V-5.1V;
2.RCA connector outputs standard S/PDIF signal,electrical level is 550mV (standard connection load),the output impedance of 75 ohms.
3.Power suppply input is AC 115V/230V,using TALEMA transformer.


Design details:
1.Carry out electricity as the mother of the acoustic design concept,pay attention to the power supply circuit design,high-performance,low noise and fast response of the LDO as the main power source.The entire board using a multi-way independent of the LDO power supply,wherein the clock even partially adopted ADI's ultra low noise LDO,in order to ensure the ultimate output performance.

2.PCB motherboard with 4-layer circuit board design,make sure you have a complete ground plane and power planes, high-speed digital design methods to ensure signal integrity and power integrity of the entire board.The clock signal special treatment, the use of package design and precise impedance control,thereby ensuring the signal quality and increase the clock anti-jamming capability.Input and output signals are to follow standard design,especially USB high speed signals using a 90 ohm differential impedance control.

System compatibility:
1:Windows XP,Windows 7,Windows 8,Windows 10;32/64 bit,need install driver
2:Native MacOS 10.6 and later,use own driver
3:Native Linux with UAC2 compliant kernel,use own driver
4:Android OS 4.2 and above,need support OTG function

I2S port use HDMI socket output:
1.Electrical level is 3.3V LVDS differential signa.
2.DSD ON singnal,5Vpower supply,CPLD has processed the MUTE signal,so do not need to process it again.
3.DSD ON signal can be user-defined,DSD ON signal can be connected to PIN 13,14,15,16 on the socket.
4.You can adjust the phase of PIN 1-3 and PIN 7-9 with a switch.


Flexible HDMI-I2S output configuration:
Switch 1-4 is for PIN13-16 on the HDMI socket.
When you turn it into "ON",it means that HDMI PIN has DSD_ON function.
Switch 5 is clock output mode,"OFF" is MCLK,"ON" is WCK.
Switch 6 is for HDMI PIN1-3 and PIN 7-9 phase,ON is positive phase,OFF is negative phase.(ON is for Gustard DAC,OFF is for PS audio)
If it is Gustard DAC,please turn Switch 3 and 6 into "ON",others are "OFF.

Switch 7 and 8 are standby.
The case of formal version(we will write it when formal version finished,now it is not formal version),we will design a hole in the back of the case,so if you want to change configuration,you do not need to open the case.

Customer Questions & Answers

Robert Fitzgerald
Robert Fitzgerald

I will be waiting to buy your SU-1 USB digital interface soon it is upgraded to pass 512 DSD through the I2S output. Can you give me a date when you expect this to be available?  Thank you!

12/11/16 3:30 PM Asked.

Hi Robert,the singxer have no exact date.We don't know yep.Thank you.

Was this question helpful to you?  Yes   No

I noticed a latest release of the fw ver.3.34. What is the change from the last one, and when can I expect a ver with mininum latency selection? Thanks

12/13/16 7:18 AM Asked.

Hi TA,you can download from can't set latency selection.Thank you.

Was this question helpful to you?  Yes   No

Do not see 32 bit / 384 kHz as option in advance default format for my SU-1. The max showing is 24 bit / 192 kHz. Using USB / Windows 10 / 3.34 xmos driver. Why?

12/15/16 1:01 AM Asked.

Hi Jared,the singxer factory reply that looking at that inaccurate, direct player.Thank you.

Was this question helpful to you?  Yes   No

With my SU-1 using JRIVER I can select and play music at 16 bit or 24 bit but when I select 32 bit the music will not play and I get an error message from JRIVER.  Please note that I can play the same music using JRIVER at 32 bit with my Gustard X-20PRO. So why can I not play music at 32 bit from JRIVER (or any other music player) from my SU-1? Remember that I can play 32 bit from my Gustard X-20PRO. Finally windows 10 shows my Gustard X-20PRO supports 32 bit playback but only 24 playback from SU-1.

12/16/16 10:07 AM Asked.

Hi Jared,The Singxer reply,the 32bit have bug now,it will be solved through the upgrade firmware.Thank you.

Was this question helpful to you?  Yes   No

its possible pay for pay pal

12/22/16 11:05 AM Asked.

Hi ANTONIO,of course,you can pay via paypal.Thank you.

Was this question helpful to you?  Yes   No

Which pins have to be set to connect i2s hdmi to gustard dac-x20pro? If I buy from you, the guarantee is valid in Italy? Where the pins are located in singxer?

12/27/16 12:38 PM Asked.

Hi Salvatore,set 3 and 6 is on,others is off.We will ship 220V version to you. Thank you.

Was this question helpful to you?  Yes   No

Hi, you have not answered my question: The guarantee is valid in Italy? Thank you!

12/28/16 4:14 AM Asked.

Hi Salvatore,of course.Thank you.

Was this question helpful to you?  Yes   No

Hi my su-1 unit is not taking the download drive and it not working with my pc. Singxer

12/31/16 9:24 AM Asked.

Hi Eustace,you can download from:

Was this question helpful to you?  Yes   No

Does SU-1 provide USB isolation tehnique just as F-1?

12/31/16 9:50 AM Asked.

Hi Per,Yes,it's same USB isolation tehnique.Thank you.

Was this question helpful to you?  Yes   No

Hi the SU-1 unit do not work on window 10 your need to fix this. I download the this on your site.

1/5/17 8:16 AM Asked.

Hi June,where were you download?From this address : ?Thank you.

Was this question helpful to you?  Yes   No

Daily Deals