Details
Description
XD-06 is a desk-top amp having USB/coaxial/optical DAC+(tube) AMP, and LCD display screen to show play messages. It accepts up to 24Bit/192KHz high resolution audio signal. The pre-amp adopts tube ON or OFF mode, so as to achieve different styles of timbre. The post-amp is adopted OP+BUF architecture. It has 1 way Single-Ended RCA output, 1 way Balanced XLR output, 1 input select key, 1 SRC key, 1 tube on/off key, 1 GAIN set key.
Parameter:
Power Supply: ~220V /~110V
Compliant OS: Win XP,Vista,Win7,Win8 (must install driver)
MAC OS X (do not need to install drivers)
Supported sampling: USB/OPT/COA input: Maximum 192kHz/24bit
Output Power: 2000mW (32Ω load)
Frequency Range: Audio In: 10Hz~100KHz(±0.5dB)
USB/OPT/COA In: 20Hz~20KHz(±0.5dB)
Gain: +6/+16dB
THD+N: Phone Out: 0.005% (1KHz, 32Ω load)
Line Out: 0.002%
XLR Out: 0.0009%
S/N: Phone Out: 114dB (1KHz, 32Ω load)
Line Out: 114dB
XLR Out: 125dB
Analog Output Amplitude: RCA: 2Vrms
XLR: 2Vrms
Suitable Earphone Impedance: 8Ω~600Ω
Size: 306*208*67mm
Weight: 2.75kg
Features:
It has 1 way Single-Ended RCA input.
With two grades of gain selection, it can match different headphone.
With the function of regaining sampling frequency, it can select 48/96/192KHz.
It has 1 way Single-Ended RCA line output, and 1 way Balanced XLR line output.
It can choose the tube ON or OFF mode, so as to achieve different styles of timbre.
Adopts high-performance D/A chip: WM8741*2, can supports up to 192KHz/24Bit I2S signal
Adopts transistors for class A buffer which may carry out huge thrusts and tiny distortions to amplify.
It built-in mute circuit when turn on amplifier to aviod POP noise and make sure the tube is worked at its best condition.
Customized RN transformers with low noises and leakage flux, and famous filter capacitances such as ELNA, NICHICON, RUBYCON are applied.
It adopts CS8422 for SPDIF signal input, works at asynchronous transmission mode, provides I2S interface for decoding, can support up to 192KHz/24Bit coaxial/optical/I2S signal.
Adopts XMOS chip for USB signal input, PC jitter-free USB Audio with Asynchronous Transfer Mode, provides I2S interface for decoding, can support up to 192KHz/24Bit USB signal, support WASAPI,ASIO,KS Kernel Stream Mode.
Package:
Driver * 1
Manual * 1
USB Cable * 1
XD-06 Unit * 1
Power Cord * 1
Warranty Card * 1
Customer Questions & Answers

Can you turn the tube on/off yourself? Is there a return policy?
6/14/15 10:35 AM Asked.
The tube can't turn on/off by the user. It is depends on the unit, when the unit turn on, tube turn on, when unit turn off, tube turn off. Return policy: If the item have any quality problem when customers receive it within 7 days, customers can return it back to me, i can ship customers a new one (seller in charge of freight out and home ) or refund you (including your return shipping fee). If the item don't have anything quality problem when customers receive it within 7 days, but customers don't need it (not satisfied with the sound or think that i don't reach cusomers's expect), customers also can ship it back to us, however, they have to incharge of return shipping fee, and if we found item have any damage when we receive it, customers have responsibel to this item. Thanks.
Was this question helpful to you? Yes No- Previous Page
- 1
Daily Deals
-
- GUSTARD DAC-X26 DAC Dual ES9038PRO DSP PLL Native Balanced Decoder
-
US$1,169.00
US$1,299.00
-
- TOPPING NX3s Portable Amp HiFi Headphone Amplifier
-
US$59.49
US$69.99
-
- Topping NX4 DSD XMOS-XU208 DAC ES9038Q2M Chip Portable Headphone Amplifier Decoder
-
US$135.99
US$159.99
-
- TOPPING D50 HIFI Audio DAC ES9038Q2M2 XMOS XU208 DSD512 USB 32Bit/768KHz DSD512 Decoder
-
US$212.49
US$249.99
-
- Topping DX7S ES9038Q2M DSD512/PCM768 XMOS USB Full Balanced DAC Headphone Amplifier
-
US$424.99
US$499.99
-
- Topping MX3 DAC/headphone amp Digital amplifier with built-in Bluetooth receiver
-
US$110.48
US$129.98